Vision Hi-Tech VPD200SM2i Guide d'installation télécharger pdf (Page 8)

Page 8 / 15

Communication Protocol Setup

1 2 3 4

 Select the appropriate Protocol with DIP switch combination.

Switch State

Protocol/Baud rate

(Pin 1)

(Pin 2)

(Pin 3)

OFF

PELCO-D, 2400 bps

OFF

PELCO-D, 9600 bps

OFF

PELCO-P, 4800 bps

OFF

PELCO-P, 9600 bps

Otherwise

Reserved

 If you want to control using DVR or P/T controller, their protocol must

be identical to camera. Otherwise, you can not control the camera.

 Adjust the DIP switch after turning off the camera. If you changed the

camera protocol by changing the DIP switch, the change will be effective

after you reboot the camera.

 Factory default of protocol is “Pelco-D, 2400 bps”.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Vision Hi-Tech VPD200SM2i Guide d'installation Page 8